Markets, Research
How to read a drill result without getting fooled by the headline
Grade, width, true thickness and radiometric readings: what each one means and what to check first.
November 5, 2026
Drill results are the most common news release in junior mining, and the headline is usually the best number in the release. Here is how to read past it.
1. Multiply grade by width
A short interval at a high grade can contain less metal than a long interval at a lower grade. Grade times width, often called grade thickness, is a quick way to compare holes.
2. Separate the interval from the "including"
Releases often show a long interval, then a shorter high grade section inside it, such as 20 metres at 2 g/t, including 1 metre at 25 g/t. Do not read them as two separate results. In that example, the short section may supply a large share of the metal in the longer interval.
3. Check drill length against true thickness
Widths are usually measured along the drill hole. If the hole crosses the mineralization at an angle, the true thickness is smaller. Look for a stated true width or an estimate of it.
4. Look for capping and cut-off grades
A cut-off grade decides where an interval starts and stops. A lower cut-off makes intervals longer and a cap limits very high values. Both are normal, but they change how a result reads, so compare like with like.
5. Know what uranium readings mean
Uranium explorers often report counts per second from a gamma probe before lab results arrive. These readings help find radioactive zones, but they are not uranium grades. Wait for assays.
6. Ask where the hole sits
A hole inside a known zone confirms what is already there. A step-out, drilled away from known mineralization, can show that the deposit is bigger. A discovery hole in a new area is a different thing again. The location often matters more than the number.
7. Think about what it would take to mine
Depth, width, metallurgy and distance to infrastructure all decide whether a result could ever become a mine. A great intercept 800 metres down is not the same as one near surface beside a road.